DR-101

temperature recorder with printer

- measurement: temperature

- range: -40...+120°C

- temperature sensor: 1

- mounting: wall-mounted

- power supply: 12...24V

Kod produktu: 1238

Dane techniczne

Inputs:

1 temperature sensor: NTC 5kΩ at 25°C

2 digital input (normally closed or open)

Measurement range:

NTC: -40...+120°C

Measurement Accuracy:

NTC in the range: -40...+80°C: +/-0.5°C, otherwise +/-1°C

Indication resolution:

0.1°C

Display:

LCD with backlight, 2 x 16 characters

Memory Buffer:

32,000 measurements, non-volatile memory

Freq. data storage:

1...999 minutes

Printer:

thermal, printing speed 30mm/s

Paper:

thermosensitive, width 57.5+/-0.5mm, roll diameter 35mm

Installation:

wall-mounted in a hermetic IP65 housing

Degree and protection class:

IP65/II

Power:

12...24V=/~+/-20% or for stationary version: 85...265V~

Power consumption:

when recording 50mA, when printing up to 3A

Working conditions:

-25...60°C

Storage conditions:

-40...80°C

  • 1 temperature sensor
  • 2 signaling inputs
  • temperature alarm
  • hermetic housing
  • power supply 12...24V or 230V
  • printing abbreviated reports: delivery report, daily report, current measurements report, last hour report
  • printing reports full of any period of time
  • power on/off key
  • menu in the following languages: Polish, German, English

The DR-101 recorder is designed to measure and record temperature and events (door opening, etc.). Current temperature values and alarm states are presented on a backlit alphanumeric display. The measurement data are stored in the recorder's non-volatile memory. The frequency of data memorization can be programmed in the range from 1 to 999 minutes. The memory capacity is 32,000 measurements, enough for 1 year of measurements. After filling the memory, the recorder continues to work, the oldest measurements are successively replaced with the newest ones. The stored data can be deleted, and the entry to the menu is password protected. The recorder is equipped with a thermal printer, thanks to which it is possible to print data from the device's memory for any period of time. Each report shows the owner's data, description of the vehicle and sensors, the course of temperature over time, events from the digital input, temperature alarms, start and end times of delivery and a place for signature. The report allows you to track the entire transport history by the final recipient of the goods. The user can program the minimum and maximum temperature, after exceeding which he will be informed by a message on the display, a sound signal and the active state of the relay. The operation of the device is simple and intuitive, all messages and commands are displayed in Polish. The recorder set includes an NTC temperature sensor with a 5m cable. It enables temperature measurement in the range: -40...+80°C with an accuracy of +/-0.5°C. The device is designed for control in transport and is powered from the car electrical system 12...24V. A stationary version with 230V mains supply is also available. Optionally, door opening sensors, external sounders and a calibration certificate are also available.

The DR101 set includes: recorder + 1 temperature sensor.

Powiązane produkty

DR-401

- measurement: temperature

- range: -200...+650°C

- temperature sensor: 3

- mounting: wall-mounted

- power supply: 12...24V or 230V

DR-201

- measurement: temperature, humidity

- range: -40÷120°C, 0÷100%Rh

- temperature sensor: 3

- assembly: in the driver's cabin

- power supply: 12÷24V

- USB port (option)

- escomonitor.com (optional)

- location (option)

© ESCO S.C 2024