TC411
Wall-mounted room thermostat with a weekly programmer
application: underfloor heating
programmer: weekly
power supply: 230V
Dane techniczne
Kit components: | thermostat TC411 |
Temperature setting range: | +5°C...+90°C |
Accuracy of temperature setting (hysteresis): | from +0.5°C to +5°C |
Resolution: | 0.5°C |
Operating mode: | manual: maintains one temperature automatic: maintains a comfortable or economical temperature level according to program antifreeze: protection against temperature drop below the set value |
Display: | LCD, backlit (turns off after 15 sec.) |
Contact load capacity: | 16A 250V~, max. 3200W |
Power: | 230V~ |
Installation: | surface-mounted |
| Dimensions | width x height x depth: 82x92x29mm |
Working conditions: | -10...60°C; 0...90%RH (non-condensing) |
Degree and protection class: | IP20/II |
The thermostat is designed to regulate the temperature in heating systems:
- 1. electric underfloorheating (floor mats)
- 2. water underfloorheating (control of actuators in the manifold)
- 3. electric heater, accumulation stove
- 4. heating cables, anti-icing systems
Its high current strength (16A) makes it an ideal solution in cooperation with many heat sources, making it a very versatile device.
The regulator has a built-in air temperature sensor and the ability to connect an external temperature sensor. It can work only with an air sensor, only with a floor sensor, or with two sensors at the same time, where the floor sensor is then a sensor protecting the system against overheating (two sensors are used in floor heating, especially with wooden linings).
The thermostat maintains the set temperature according to set program per day, which reduces energy costs and ensures comfort for users, there are 3programs to choose from.Programming is very simple and allows you to adjust the work cycle to your rhythm of the day.
The controller also enables operation in manual or antifreeze mode.
© ESCO S.C 2025