The regulator has a built-in air temperature sensor and the ability to connect an external temperature sensor. It can work only with an air sensor, only with a floor sensor, or with two sensors at the same time, where the floor sensor is then a sensor protecting the system against overheating (two sensors are used in floor heating, especially with wooden linings).
Kit components: | thermostat TC520 |
Temperature setting range: | +5°C...+90°C |
Accuracy of temperature setting (hysteresis): | from +0.5°C to +5°C |
Temperature reading accuracy: | 0.1°C |
Operating mode: | manual: maintains one temperature automatic: maintains a comfortable or economical temperature level according to program antifreeze: protection against temperature drops below 5°C |
Display: | LCD, backlit (turns off after 20 sec.) |
Contact load capacity: | 2 relays 3A 250V~, max.600W, |
Power: | 230V~ |
Installation: | flush-mounted in a standard 60mm diameter installation box |
Working conditions: | -10...60°C; 0...90%RH (non-condensing) |
Degree and protection class: | IP20/II |
Basic information:
The thermostat is designed to regulate the temperature in heating systems:
1. heating/cooling systems
2. water underfloor heating (control of actuators in the manifold)
3. three-way valve with actuator, central heating or hot water circulation pump
4. fan, heating cable, etc.
The thermostat maintains a comfortableor economictemperature according to program during the day, which reduces energy costs and ensures comfort for users. You can choose from 6 programsin the Mon-Fri and Sat-Sun cycle or an individual programtailored to your needs for each day of the week. Programming is very simple and allows you to adjust the work cycle to your rhythm of the day.
The controller also enables operation in manual or antifreeze mode.
More information on ESCO thermostats can be found in our articles:
© ESCO S.C 2024