The controller has a built-in air temperature sensor and the possibility of connecting an external temperature sensor. It can work only with an air sensor or only with a floor sensor, or with two sensors at the same time, and the floor sensor is then a sensor protecting the system against overheating (two sensors are used in underfloor heating, especially with wooden cladding).
Kit components: | TC510 thermostat |
Temperature setting range: | + 5 ° C ... + 90 ° C |
Temperature setting accuracy (hysteresis): | from + 0.5 ° C to + 5 ° C |
Temperature reading accuracy: | 0.1 ° C |
Operating mode: | manual: maintains one temperature automatic: maintains the temperature level comfortable or economical acc. to given program anti-freeze protection: protection against temperature drop below 5 ° C |
Display: | LCD, with a backlit (turns off after 20 sec.) |
Contact load: | 16A 250V ~, max. 3200W |
Power supply: | 230V ~ |
Installation: | flush-mounted in a standard installation box with a diameter of 60mm |
Working conditions: | -10 ... 60 ° C; 0 ... 90% RH (non-condensing) |
Degree and class of protection: | IP20 /II |
Basic information:
The thermostat is designed to regulate the temperature in heating systems:
1.electric floor heating (floor mats)
2.water floor heating (control of actuators in the manifold)
3. electric heater, storage heater
4. heating cables, anti-icing systems
The thermostat keeps the temperature comfortableor economicalaccording to a given program during the day, which lowers energy costs and provides comfort to users. There are 6 programs to choose from in the Mon-Fri and Sat-Sun cycle or an individual program, tailored to your needs for each day of the week. Programming is very simple and allows you to adjust the work cycle to your daily routine.
The controller also enables operation in manual or anti-freeze mode.
© ESCO S.C 2024