TC-410
Room thermostat with a weekly programmer
The controller can work with an air sensor or a floor sensor, or with two sensors at the same time, where the floor sensor is then a sensor protecting the system against overheating (two sensors are used in floor heating, especially with wooden linings).
[d] Pliki do pobrania
Dane techniczne
Kit components: | thermostat TC410 |
Temperature setting range: | +5°C...+90°C |
Accuracy of temperature setting (hysteresis): | from +0.5°C to +5°C |
Temperature reading accuracy: | 0.1°C |
Operating mode: | manual: maintains one temperature automatic: maintains a comfortable or economical temperature level according to program antifreeze: protection against temperature drop below the set value |
Display: | LCD, backlit (turns off after 20 sec.) |
Contact load capacity: | 16A 250V~, max. 3200W |
Power: | 230V~ |
Installation: | flush-mounted in a standard 60mm diameter installation box |
| Dimensions | width x height x depth: 86x90x26mm |
Working conditions: | -10...60°C; 0...90%RH (non-condensing) |
Degree and protection class: | IP20/II |
Basic information:
- programming 24/7
- measurement with an accuracy of 0.1°C
- temperature control sensitivity from 0.5°C to 5.0°C
- 2 temperature sensors (air + floor)
The thermostat is designed to regulate the temperature in heating systems:
1. electric underfloorheating (floor mats)
2. water underfloorheating (control of actuators in the manifold)
3. electric heater, accumulation stove
4. heating cables, anti-icing systems
The thermostat maintains the set temperature according to set program per day, which reduces energy costs and ensures comfort for users, there are 3programs to choose from.Programming is very simple and allows you to adjust the work cycle to your rhythm of the day.
The controller also enables operation in manual or antifreeze mode.
More information on ESCO thermostats can be found in our articles:
© ESCO S.C 2024